toll free: (866) MAG-PUMP   |   tel: (713) 972-8666
fax: (713) 972-8665   |   email: inquiries@magnatexpumps.com
Industrial turbo Blowers

Fiberglass Reinforced Plastic Pump | FRP Pump | FRP ANSI Pumps

FRP (Fiberglass Reinforced) Pumps
FRP Pump

MAGNATEX® MFRP-L ANSI Specifications

Maximum Flow1800 GPM
Maximum Head 450 FT
Liquid Temperature-50°F (-45°C) and 250°F (120°C)

Manufacturing Process

The pumps are manufactured using the RTM injection molding process. Reinforcing layers of fiberglass mat are placed in molds prior to injecting the appropriate resin, depending on the application. The use of layers of different weight mats produces a finished product of the highest possible mechanical strength, comparable to stainless steel or alloy pumps, so that a casing armor is not required to reinforce the strength of the pump. Thermoset resin pumps offer higher strength, thermal and dimensional stability and much longer life than competitive thermoplastic pumps.

MFRP-C-ANSI Mechanical Seal Series Pumps

Magnatex/Argal MFRP ANSI Mechanical Seal Pumps are designed to handle the most demanding corrosive services in the process industries. All wet end parts are manufactured from high strength fiberglass reinforced polyester (FRP) in order to resist corrosion, abrasion and operating temperatures between -50°F (-45°C) and 250°F (120°C). The pumps are manufactured to conform to ANSI B73.1 dimensional requirements and are available in both close coupled and long coupled configurations, depending upon your preference.

Fiberglass Polyester Process Pump

MAGNATEX® MFRP-C ANSI Specifications

Maximum Flow1200 GPM
Maximum Head 246 FT
Liquid Temperature-50°F (-45°C) and 250°F (120°C)

Applications

Depending on the application, the use of different formulations of epoxy vinyl ester resins provides a broad spectrum of chemical and abrasion resistance, such that the pumps are commonly used in industrial and municipal waste water treatment facilities, water parks, large scale aquariums, zoos and aquaculture farms.

Fiblerglass Resin Applications
V1G standard vinyl ester resin compound General purpose
V1A vinyl ester resin compound Abrasive liquids
V1C vinyl ester resin compound Bleaches applications
V1F vinyl ester resin compond Flouridric applications
Market Applications
Aquariums/Zoos Salt water
Chemical Process
Acids
Chemical waste
Waste water
Desalination
Filtration
Seawater In-take
Chemical Transfer
Concentrated Brine
Electronic Utilities Coal pile run-off
Electronics
Acids
Chemical waste
Metal Finishing
Chromic acids
Pickling acids
Plating solutions
Petrochemical
Acids
Chemical waste
Pharmaceutical Organic Solvents
Pulp and Paper Bleach
Mining Abrasives and Corrosives
Scrubbers/Odor Control Acids and Caustics

FRP ANSI Plastic Pump Curves

ISO 9001:2008 Certification
ISO 9001:2008 Certification