toll free: (866) MAG-PUMP   |   tel: (713) 972-8666
fax: (713) 972-8665   |   email: inquiries@magnatexpumps.com
 

 

Magnatex All-Metallic : MAXP Series | MPL/MP Series | MPH Series | MPT Series | MMP Series
Magnatex/Texel Fluoropolymer-Lined : ME Series | MTA Series
 

Products...

Model Configuration Connection Max Head Ft. Max Flow GPM Temperature Range °F Max Working Pressure PSIG Max HP Frame Type Materials of Construction
MAXP ANSI
Long-coupled
150# RF
300# RF
470' 2000 GPM -150 to 550°F 285 PSIG 200 HP
NEMA T, TS
316SS
304/L, 316L, Alloy 20, Hastelloy C
MP
ML
Sub-ANSI
Close-coupled
150# RF 190' 150 GPM -22 to 300°F
-112 to 80°F
150, 225 PSIG 5
NEMA TC
316SS std, A20 Hast C
MPH Sub-ANSI
Close-coupled
150# RF 190' 150 GPM 300 to 536°F 150, 225 PSIG 5
NEMA TC
316SS std Alloy 20 Hastelloy C
MPT
MPTH
Sub-ANSI
Close-coupled
Regen turbine
NPT or
150# RF
500' 40 GPM -22 to 300°F
300 to 536°F
225 PSIG 5
NEMA TC
316SS
MMP
MML
MMH
Sub-ANSI
Close-coupled
NPT or
150# RF
95' 20 GPM -22 to 300°F
-112 to 80°F
300 to 536°F
85 PSIG ¾
NEMA 56C
316SS
MEP Close Coupled Centrifugal Pump 2" Max 103' 106 GPM 175°F 55 PSIG 5 HP Polypropylene
MES Close Coupled Self Priming Centrifugal Pump 2" Max 90' 65 GPM 175°F 55PSIG 3 HP Polypropylene
MTA ANSI lined pump
Close-coupled
150# RF 285' 320 GPM 32 to 250°F 150 PSIG 25 HP
NEMA TC
PFA lined
MST Under Construction              
ME Sub-ANSI lined pump
Close-coupled
150# RF 140' 90 GPM 32 to 195°F 150 PSIG 3 HP
NEMA TC
PVDF (Kynar®) or ETFE lined
S Close Coupled Gear Pump 1 1/2" Max 350'
150 PSI
30 GPM 450°F 225 PSIG 5 HP 316 SS
Alloy 20
Hastelloy
Ryton
SM Close Coupled Magnet Drive Gear Pump 2" Max

254'
110 PSI

30 GPM 450°F 225 PSIG 5 HP 316 SS
Alloy 20
Hastelloy

 

Metallic & Nonmetallic Models

Whether considering the benefits of Magnatex® heavy-duty, all-metallic pumps, or the efficiency and dependability of Magnatex®/Texel® fluoropolymer-lined pumps, one thing is certain - the assurance of high quality pumping performance at a low overall cost of ownership. Magnatex pumps ensure that the difficult requirements of your critical pumping application are met 100% of the time. 

 

 

Metallic Model
    Slip-fit construction for easy, on-site maintenance
    Inner magnet straddle-mounted between dual SiC bearings reduces shaft loads compared to competitors' over-hung designs
    Optional patent-pending SiC-X bearings provide extended dry-running operation capability on smaller models without damage
    Sub-ANSI models allow operation closer to BEP for low flow applications with reduced initial price and operating costs
    Rare earth Neodymium or Samarium Cobalt (for high-temperature services)  magnets

 

Nonmetallic Model
    Proprietary, seamless inner magnet construction on PFA models minimizes swelling common to competitors' ETFE models
    Transfer compression molded PFA provides thicker, smoother and more uniform lining than competitor's roto-molded ETFE which maximizes Magnatex's chemical and abrasion resistance
    Unique dovetail design ensures PFA lining stability during pressure/temperature fluctuations
    Slip-fit, fixed shaft construction for easy, on-site maintenance
    Non-metallic rear casing eliminates pump hysteresis losses and increases pump efficiency   
    Smaller ME Series with replaceable liner and light, compact rotor supported by a single bearing in C-PTFE or SiC is easily maintained and extremely cost effective

 

 

 


 

 

 
Magnatex Pumps, Inc. 3575 West 12th Street Houston, TX 77008  |  toll-free tel: (866) MAG-PUMP  |  tel: (713) 972-8666  |  fax: (713) 972-8665