toll free: (866) MAG-PUMP   |   tel: (713) 972-8666
fax: (713) 972-8665   |   email:
Industrial turbo Blowers

Catalyst Pumps | Polymer Pumps | pH Control Pumps



Overview




Mag-Drive Close
Couple SM200 Series
MAG-DRIVE-CLOSE-COUPLED-SM200-SERIES MAG-DRIVE-CLOSE-COUPLED-SM400-SERIES
Mag-Drive Close
Couple SM400 Series

Mag-Drive Close
Couple SM900 Series
MAG-DRIVE-CLOSE-COUPLED MAG-DRIVE-CLOSE-COUPLED-RM100-SERIES
Mag-Drive Close
Couple RM100 Series
METALLIC-S200-Series-Cutway Metallic S200 Series Cutwaway


Metallic R100 Series ETALLIC-R100-Series METALLIC-S900-Series Metallic S900 Series


Non-Metallic Ryton S900 ON-METALLIC-RYTON-S200 NON-METALLIC-RYTON-S900 Non-Metallic Ryton S200
chemsteel-hydraulic-range-at-1750-rpm CHEMSTEEL FEATURES
  • Flows from 0.5 to 30 GPM at 1750 RPM
  • Pressure from 0 to 150 PSI
  • Gear & bearing combinations of metallic and nonmetallic wear surfaces.
  • Slotted bearings to lubricate shaft and gear surfaces.
  • Hydraulic porting to balance axial thrust and to reduce wear.
  • Ample port sizing to reduce the likelihood of cavitation when inlet pressure is marginal.
  • Effective housing seals with elastic memory prevent leakage of corrosives.
  • Recirculation heat port versatility.
  • Containment can flush and drain connections.
  • 316 Stainless Steel
  • Alloy C
  • Non-Metallic - Ryton
  • Packing - Lip - Mechanical - Seal-less
  • NEMA Close Coupled Adapters
  • Accessories
Example of Seal-Less Magnetic Drive SM207
Pump Dimensions.
chemsteel-sm207-pump-dimensions
mag-chemsteel-dimensions


Example of S207 Metallic Close Coupled Pump Dimensions
S207-close-coupled-pump-dimensions


Example of S207 Non-Metallic Close Coupled Pump Dimensions S207-non-metallic-close-coupled-pump-dimensions
S207-pump-dimension-chart

 
BI-DIRECTIONAL OPERATION
For applications requiring reversing flow

BODY/COVER STATIC O-RINGS
Teflon® encapsulating silicone for sealing with a memory

COMBINED BEARING ∓ WEARPLATE
Full size bearings match the gear diameter and eliminate the need for separate wear plates
Gear trimming for desired flow rates
Made of carbon-graphite, Teflon© or Rulon©

HELICAL GEARS Noise reduction up to 10 db

SEAL HOUSINGS
Ported for flush, drain, barrier fluid and lantern packing lubrication
Access to seals without removal of cover

UPPER DRIVE STANDARD
Lends itself to in-line pump seal maintenance without leakage of trapped chemicals
Easily converted to a lower drive configuration

OPTIONAL BEARING FLUSH PORTS
To extend bearing life when pumping non-lubricating fluids or fluids with a small degree of fine solids

INTERFACING TO WORLD STANDARDS
NPT & BSPT porting
Metric pump hardware
Close-coupled adapters for NEMA and IEC standard motor frame sizes

EXTENDED LIFE
Gear & bearing combinations of metallic and non-metallic wear surfaces
Slotted bearings to lubricate shaft and gear surfaces
Hydraulic porting to balance axial thrust and reduce wear
DYNAMIC SEAL OPTIONS INCLUDE
Single or double mechanical wedge & bellows styles
Standard compression packing
Lantern Ring compression packing
Lip seals

  METALLIC & NON-METALLIC
Wide range of capability
Effective weight and cost selection



Chemsteel Tandem Pumps

Chemsteel Tandem Pumps Polymer Pumps

Tandem Pumps double the output flow for a single fluid. Or with isolation, handle different fluids in direct ratio to each other.


Mag Drive Catalyst Pumps



pH Control Pumps

Catalyst Pumps
Chemsteel Magnetic Gear Pumps are engineered to safely handle hazardous, toxic, highly corrosive or explosive chemicals. Available in: Stainless Steel, Alloy C and Ryton


Pump Construction



Ryton©
Polyphenylene Sulfide PPS, an engineered, reinforced plastic, offering a wide range of chemical compatibility, physical stability, and high temperature resistance (to 200┬░ F).

Type 316
An all purpose austenitic stainless, excellent corrosion resistance; premium choice of all 300 series alloys.

Alloy C
Most used of exotic high/nickel alloys. Superior corrosion resistance for severe alkaline and acidic pumping applications.


Cleaning Agent Pumps
Chemsteel Polymer Gear Pump


GEARS
Precision machined metallic gears of 316SS, W88 stainless, and Alloy C. Also available in glass reinforced Teflon©, Ryton© and carbon reinforced PEEK.



SHAFTS
Shafts are 316 stainless steel or Alloy C.
Chemical Resistant Carbon Sleeve Bearings
Catalyst Pump Seals


SEALS
Single and/or double mechanical seals are offered in elastomer bellows and Teflon© wedge designs. Bellows design available with Viton© or EPDM formed elastomer shaft seal. Wedge designs available with Teflon© wedge shaft seal and perfluoroelastomer stationary seat o-rings. Packing materials: Teflon©, Grafoil© and Teflon©/Graphite.

BODY/COVER O-RINGS
Teflon© encapsulating, silicone o-rings provide elastic memory to assure an effective long lasting seal. Avoiding the re-torquing required of pumps using pure TFE.



CLOSE COUPLED MAG DRIVE PUMPS
BODY Stainless Steel, Ryton and Alloy C constructions
GEARS Ryton©, Peek, 316 SS, W88, Alloy C and Teflon©
SHAFTS 316 SS or Alloy C
BEARINGS Carbon, Teflon© and Rulon©



  • Neodymium or Samarium cobalt magnets
  • Close Coupled Adapters for NEMA and IEC standard motor frame sizes
  • 316 Stainless Steel, Ryton and Alloy C containment cans
  • ½ to 30 GPM