toll free: (866) MAG-PUMP   |   tel: (713) 972-8666
fax: (713) 972-8665   |   email:
Industrial turbo Blowers

Solids Handling Mag Drive Pumps | Self Cleaning Strainer | Self Flushing Strainer

Metallic Sealless Mag-Drive Pumps Handle Solids

Can mag-drive pumps handle this pumpage? They can if they are Magnatex Sealless Mag-Drive Pump!   Mag-Drive Sealless Solids Pump

Many users of standard sealed, process pumps become frustrated with the high cost of frequent seal replacement and downtime when handling solids. A suitable flushing arrangement might help a sealed pump situation, but the advantages of sealless pumps are now available for many of these applications!

Like the faces of seals in a standard pump, sealless pump sleeve bearings and thrust rings must deal with the process fluids. Magnatex has developed provisions to allow handling of solids, making the total cost of mag-drive pump ownership lower, even over short periods of time, compared to traditional, sealed pumps.

Magnatex’s metallic, standard design pumps are typically limited to 1% by weight of 500 micron solids or up to 4% of 100 micron particles. The simplest way to limit larger solids and higher concentrations is to use a 40-mesh strainer on the suction. Unfortunately, this can result in the strainer plugging, which can result in "starving" the pump suction and subsequent failure of the pump.

Rear Casing BreachWhat happens if higher concentrations of solids go through a mag-drive pump? If percentage of solids or size exceeds the above values, provisions must be made to allow use of our models because:


1. Solids-laden pumpage doesn’t lend itself to being a good lubricant and can even foul bearing flutes, resulting in inadequate bearing flush.

2. Solids can also become caught in vortices that form near the bottom of rear casings, acting like a small machine tool, ultimately resulting in a containment breach.

3. Erosive wearing at the bottom of a rear casing, typically noted as polished “scalloping”, can also result in a breach, especially, if there is one, at any welded section.

Baffle Plated Solids PumpMagnatex has the answer!--"Baffle-plated," anti-vortex rear casings that break up the vortices, eliminating the potential damage caused by solids-laden vortices that can lead to a rear casing breach. This option is available with our MPL/MML/MPH and MAXP/MAXC product lines.

Self Cleaning Strainer Additionally, Magnatex offers either self-cleaning or cyclone separators mounted in the discharge line with the resulting clean product flush introduced to a port in the rear casing flange after plugging of the internal flush ports. This option is available only with the MAXP/MAXC

Neither will disrupt the process as there is no dilution, and solids simply continue down the discharge pipe in the same concentrations as they entered the pump.

Self Cleaning Strainer on DischargeOf course, another option in conjunction with plugging of the internal flush ports would be to introduce a clean, compatible liquid to the rear casing, but care must be taken to avoid product dilution that could upset the process and to assure adequate pressure and resultant flow is always available.

Rear Casing Details

Long-Coupled, ANSI Dimensioned

ISO 9001:2008 Certification
ISO 9001:2008 Certification

 

MMP Series Pumps