 |
|
|
|
|
Magnatex All-Metallic : MAXP Series | 3575 Series | MPL/MP Series | MPH
Series | MPT Series | MMP Series
Magnatex/Texel Fluoropolymer-Lined : ME Series | MTA Series |
Centrifugal Pump, Gear Pump, Magnetic Drive Pump
|
|
|
| Model |
Configuration |
Connection |
Max Head Ft. |
Max Flow GPM |
Temperature Range °F |
Max Working Pressure PSIG |
Max HP Frame Type |
Materials of Construction |
| MAXP |
ANSI
Long-coupled
|
150# RF
300# RF
|
470' |
2000 GPM |
-150 to 550°F |
285 PSIG |
200 HP
NEMA T, TS
|
316SS
304/L, 316L, Alloy 20, Hastelloy® C |
3575
|
ANSI
Long-coupled
Mechanical Seal
|
150# RF
300# RF |
720' |
5000 GPM |
-350 to 700°F |
375 PSIG |
300 HP
|
DI, 316SS, CD4MCu, Alloy 20, Hastelloy® C, Titanium |
MP
ML
MPH
|
Sub-ANSI
Close-coupled
|
150# RF |
190' |
150 GPM |
-112 to 536°F |
225 PSIG |
5
NEMA TC
|
316SS, Alloy 20, Hastelloy® C |
MPL
MHL
MLC |
ANSI Compatible
Close-coupled
|
150# RF |
400' |
340 GPM |
-100 to 536°F |
225 PSIG |
20 HP
NEMA TC
|
316SS, Alloy 20, Hastelloy® C |
MPT
MPTH |
Sub-ANSI
Close-coupled
Regen turbine
|
NPT or
150# RF
|
500' |
40 GPM |
-22 to 536°F |
225 PSIG |
5
NEMA TC
|
316SS |
MMP
MML
MMH |
Sub-ANSI
Close-coupled
|
NPT or
150# RF
|
95' |
20 GPM |
-22 to 536°F |
85 PSIG |
1
NEMA 56C
|
316SS |
| MEP |
Close Coupled Centrifugal Pump |
2" Max |
103' |
106 GPM |
175°F |
55 PSIG |
5 HP |
Polypropylene |
| MTA |
ANSI lined pump
Close-coupled
|
150# RF |
285' |
320 GPM |
32 to 250°F |
150 PSIG |
25 HP
NEMA TC
|
PFA lined |
| MST |
Sub-ANSI
Close-coupled |
150# RF |
260' |
140 GPM |
250°F |
150 PSIG |
30 HP
NEMA TC |
PFA lined,
SiC rear casing |
| ME |
Sub-ANSI lined pump
Close-coupled
|
150# RF |
140' |
90 GPM |
32 to 195°F |
70 PSIG |
3 HP
NEMA TC
|
PVDF (Kynar®) or ETFE lined |
| S |
Close Coupled Gear Pump |
1 1/2" Max |
350'
150 PSI |
30 GPM |
450°F |
225 PSIG |
5 HP |
316 SS,
Alloy 20,
Hastelloy® C,
Ryton |
| SM |
Close Coupled Magnet Drive Gear Pump |
2" Max |
254'
110 PSI
|
30 GPM |
450°F |
225 PSIG |
5 HP |
316 SS,
Alloy 20,
Hastelloy® C |
|
|
Centrifugal Pump, Magnetic Drive Pumps, Gear Pumps, Centrifugal Pump
|
|
|
Metallic Model
Slip-fit construction for easy, on-site maintenance
Inner magnet straddle-mounted between dual SiC bearings reduces shaft loads compared to competitors' over-hung designs
Optional patent-pending SiC-X bearings provide extended dry-running operation capability on smaller models without damage
Sub-ANSI models allow operation closer to BEP for low flow applications with reduced initial price and operating costs
Rare earth Neodymium or Samarium Cobalt (for high-temperature services) magnets
Close coupled Sub-ANSI models easily retrofit ANSI long coupled pumps
Nonmetallic Model
 Proprietary, seamless inner magnet construction on PFA models minimizes swelling common to competitors' ETFE models
Transfer compression molded PFA provides thicker, smoother and more uniform lining than competitor's roto-molded ETFE which maximizes Magnatex's chemical and abrasion resistance
Unique dovetail design ensures PFA lining stability during pressure/temperature fluctuations
Slip-fit, fixed shaft construction for easy, on-site maintenance
Non-metallic rear casing eliminates pump hysteresis losses and increases pump efficiency
Smaller ME Series with replaceable liner and light, compact rotor supported by a single bearing in C-PTFE or SiC is easily maintained and extremely cost effective
Centrifugal Pump, Gear Pump, Magnetic Drive Pump
|
|
 
|
|
|
|
Magnatex Pumps, Inc. 477 W. 38th Street Houston, TX 77018 | toll-free tel: (866) MAG-PUMP | tel: (713) 972-8666 | fax: (713) 972-8665
|
|
|
